fbpx
0

  • No products in the cart.

AutoCAD, Solid Works, CATIA in Malayalam Version 1

Course Currilcum

      • Knowing JAP 00:00:00
      • Elaborating JAP 00:00:00
      • Introduction to AutoCAD user interface 00:00:00
      • AutoCAD Navigation Tools 00:00:00
      • Understanding Co-ordinate system 00:00:00
      • Limits and Units 00:00:00
      • Creating a Template 00:00:00
      • All About Chalo INDIA Startup Drive 00:00:00
      • AVODHA Official Malayalam YouTube Channel 00:00:00
      • Making Lines 00:00:00
      • Lines using Polar 00:00:00
      • Circles in AutoCAD 00:00:00
      • Arc in AutoCAD 00:00:00
      • Ellipses 00:00:00
      • Rectangles 00:00:00
      • Introduction to Polyline and Spline 00:00:00
      • Points and Revision Clouds 00:00:00
      • Construction Line and Ray 00:00:00
      • Move and Copy command 00:00:00
      • Rotate command 00:00:00
      • Offset command 00:00:00
      • Trim and Extend 00:00:00
      • Erase, Explode and overkill 00:00:00
      • Stretch command 00:00:00
      • Break and Join 00:00:00
      • Lengthen and Reverse 00:00:00
      • Creating Basic Hatches Part-1 00:00:00
      • Set Origin And Associative Hatch 00:00:00
      • Quiz – 1 in Malayalam 00:05:00
      • Layer Part-1 00:00:00
      • Layer Part-2 00:00:00
      • Text Part-1 00:00:00
      • Dimension Part-1 00:00:00
      • Dimension Part-2 00:00:00
      • Multileader 00:00:00
      • Table & Table Styles 00:00:00
      • Block 00:00:00
      • Groups 00:00:00
      • Attributes 00:00:00
      • Quiz – 2 In Malayalam 00:02:00
      • AutoCAD Exercise-1 00:00:00
      • AutoCAD Exercise-2 00:00:00
      • Isometric 00:00:00
      • Parametric 00:00:00
      • Page Setup, Layout & Plots 00:00:00
      • AutoCAD ‘Learn with Us’ Exercise-1 00:00:00
      • AutoCAD ‘Learn with Us’ Exercise-2 00:00:00
      • AutoCAD ‘Learn with Us’ Exercise-3 00:00:00
      • Introduction to Civil Planning 00:00:00
      • Basics of Civil Planning Part – 1 00:00:00
      • Basics of Civil Planning part – 2 00:00:00
      • Placement Theory Part – 1 00:00:00
      • Placement Theory Part – 2 00:00:00
      • Object Placement Theory Part – 1 00:00:00
      • Object Placement Theory Part – 2 00:00:00
      • Object Placement Theory Part – 3 00:00:00
      • Blocks, Attributes & Palletes Part – 1 00:00:00
      • Blocks, Attributes & Palletes Part – 2 00:00:00
      • Placement of components from Tool Palette 00:00:00
      • Placement of components from Design Centre 00:00:00
      • Section Drafting 00:00:00
      • Staircase Calculation & Drafting Part – 1 00:00:00
      • Staircase Calculation & Drafting Part – 2 00:00:00
      • Ray, Text, Layers & Stairs 00:00:00
      • Elevation Part-1 00:00:00
      • Elevation Part – 2 00:00:00
      • Elevation Part – 3 00:00:00
      • Detailing Part – 1 00:00:00
      • Detailing Part – 2 00:00:00
      • Civil Page & Layouts 00:00:00
      • X-Ref 00:00:00
      • 3D interface settings 00:00:00
      • Default Tools 00:00:00
      • Short commands 00:00:00
      • Object Selection 00:00:00
      • 2D Draw to 3D 00:00:00
      • Adjust Positions 00:00:00
      • Press Pull 00:00:00
      • Type of visual Styles 00:00:00
      • 1. New page 00:00:00
      • 2. Import 00:00:00
      • 3. Save & Save as 00:00:00
      • 4.Export 00:00:00
      • Introduction to SOLIDWORKS 00:00:00
      • Customizing Command Managers and Toolbars in SOLIDWORKS 00:00:00
      • User Interface of SOLIDWORK 00:00:00
      • Starting a New File and Opening an Existing one in SOLIDWORKS 00:00:00
      • Entering the Sketching Environment 00:00:00
      • Sketch editing tools-part 1 00:00:00
      • Sketch editing tools-part 2 00:00:00
      • Creating Line, Centerline, and Midpoint Line 00:00:00
      • Creating Circles 00:00:00
      • Creating Arcs 00:00:00
      • Creating Rectangles 00:00:00
      • Creating Polygons 00:00:00
      • Creating Splines 00:00:00
      • Creating Slots 00:00:00
      • Placing Points 00:00:00
      • Creating Ellipses and Elliptical Arcs 00:00:00
      • Creating Parabolic and Conic Curves 00:00:00
      • Creating Equation Driven Curves 00:00:00
      • Drawing Display Tools 00:00:00
      • Deleting Sketching Entities 00:00:00
      • Practice Example 1 00:00:00
      • Practice Example 2 00:00:00
      • Practice Example 3 00:00:00
      • Trimming entities 00:00:00
      • extending entities 00:00:00
      • Filleting Entities 00:00:00
      • Creating Chamfers 00:00:00
      • Offsetting Entities 00:00:00
      • Mirroring Entities 00:00:00
      • Dynamically Mirror Entities 00:00:00
      • Moving Entities 00:00:00
      • Rotating Entities 00:00:00
      • Scaling E ntities 00:00:00
      • Stretching entities 00:00:00
      • Copying and Pasting Entities 00:00:00
      • Creating Linear Pattern 00:00:00
      • Creating Circular Patterns 00:00:00
      • Modifying Sketch Patterns 00:00:00
      • Splitting Entities 00:00:00
      • Writing text 00:00:00
      • Practice Example 1 00:00:00
      • Practice Example 2 00:00:00
      • Adding Relations 00:00:00
      • Adding Automatic Relations 00:00:00
      • Dimensioning a Sketch and Smart Dimension Tool 00:00:00
      • Adding Horizontal and Vertical Dimensions 00:00:00
      • Aligned Dimensions 00:00:00
      • Angular Dimensions 00:00:00
      • Adding Diametric Dimensions 00:00:00
      • Adding Radial Dimensions 00:00:00
      • Adding Linear Diametric Dimensions 00:00:00
      • Adding Ordinate Dimensions 00:00:00
      • Practice Example 1 00:00:00
      • Practice Example 2 00:00:00
      • Fully Defining the Sketches 00:00:00
      • Dimensioning the True Length of an Arc 00:00:00
      • Measuring Distances 00:00:00
      • Determining the Section Properties of Closed Sketches 00:00:00
      • Modifying the View Orientation 00:00:00
      • Changing the View Orientation using the Reference Triad 00:00:00
      • Displaying the model in different Viewport configurations 00:00:00
      • Display Modes of a Model 00:00:00
      • Assigning Materials to the Model 00:00:00
      • Need for creating Planes 00:00:00
      • Creating Offset Planes and Parallel Planes passing through a Point 00:00:00
      • Creating a plane normal to a curve and in the middle of two faces 00:00:00
      • Creating a plane on non-planar surface 00:00:00
      • Creating Reference Axes 00:00:00
      • Creating Reference Points 00:00:00
      • Creating Reference Coordinate Systems 00:00:00
      • Creating Center of Mass 00:00:00
      • Creating Extruded Features 00:00:00
      • Creating Revolved Features 00:00:00
      • Creating Extruded Cuts 00:00:00
      • Creating Revolved Cuts 00:00:00
      • Determining the Mass Properties of Solid Models 00:00:00
      • Convert Entities Tool 00:00:00
      • Creating Intersection Curves 00:00:00
      • Offset on Surface Tool 00:00:00
      • Using Swept Boss tool 00:00:00
      • Using Lofted Boss Tool 00:00:00
      • Using Hole Wizard and Thread Feature 00:00:00
      • Using Wrap Feature 00:00:00
      • Creating Rib feature 00:00:00
      • Other Miscellaneous tools 00:00:00
      • Practice Example 1 00:00:00
      • Practice Example 2 00:00:00
      • Practice Example 3 00:00:00
      • Practice Example 4 00:00:00
      • Practice Example 5 00:00:00
      • practice example 6 00:00:00
      • Practice Example 1 00:00:00
      • Practice Example 2 00:00:00
      • Practice Example 3 00:00:00
      • Practice Example 4 00:00:00
      • Practice Example 5 00:00:00
      • Practice Example 1 00:00:00
      • Practice Example 2 00:00:00
      • Practice Example 1 00:00:00
      • Practice Example 2 00:00:00
      • Advanced render commands 00:00:00
      • Introduction to catia 00:00:00
      • Common introductory tools in CATIA-1 00:00:00
      • Common introductory tools in CATIA-2 00:00:00
      • Common introductory tools in CATIA-3 00:00:00
      • Initial basic settings in CATIA 00:00:00
      • CATIA Sketcher workbench introduction 00:00:00
      • Basic profile tools to draw sketches1 00:00:00
      • Basic profile tools to draw sketches2 00:00:00
      • Basic constraint tools1 00:00:00
      • Basic constraint tools2 00:00:00
      • Predefined profiles tools1 00:00:00
      • Predefined profiles tools2 00:00:00
      • Predefined profiles tools3 00:00:00
      • Drawing circle and arcs1 00:00:00
      • Drawing circle and arcs2 00:00:00
      • Using connect tool and drawing ellipse 00:00:00
      • Drawing lines by line tool 00:00:00
      • Drawing points 00:00:00
      • Using constraint tool in detail1 00:00:00
      • Using constraint tool in detail2 00:00:00
      • Creating corner and chamfer operations 00:00:00
      • Creating trim operations 00:00:00
      • Using operation transformation tools1 00:00:00
      • Using operation transformation tools2 00:00:00
      • Using operation transformation tools3 00:00:00
      • Analyzing sketch 00:00:00
      • Extracting sketch profiles 00:00:00
      • Example 1 00:00:00
      • Example 2 00:00:00
      • Example 3 00:00:00
      • Adding material by using pad tool 1 00:00:00
      • Adding material by using pad tool 2 00:00:00
      • Adding material by using pad tool 3 00:00:00
      • Removing material by using pocket tool 00:00:00
      • Adding revolved material by using shaft tool 00:00:00
      • Removing material by groove tool 00:00:00
      • Creating holes 1 00:00:00
      • Creating holes 2 00:00:00
      • Adding material along guide by rib tool 1 00:00:00
      • Adding material along guide by rib tool 2 00:00:00
      • Creating stiffening ribs 00:00:00
      • Using solid combine tool 00:00:00
      • Adding material by using multi-section tool 1 00:00:00
      • Adding material by using multi-section tool 2 00:00:00
      • Adding material by using multi-section tool 3 00:00:00
      • Adding material by using multi-section tool 4 00:00:00
      • Adding material by using multi-section tool 5 00:00:00
      • Adding material by using multi-section tool 6 00:00:00
      • Creating edge fillet 1 00:00:00
      • Creating edge fillet 2 00:00:00
      • Creating edge fillet 3 00:00:00
      • Creating fillets by face to face and tri-tangent tool 00:00:00
      • Creating chamfers 00:00:00
      • Creating draft 1 00:00:00
      • Creating draft 2 00:00:00
      • Creating shell on object 00:00:00
      • Using thickness tool 00:00:00
      • Applying threading/tapping 00:00:00
      • Using remove face and replace face tools 00:00:00
      • Using replace face tools 00:00:00
      • Editing the feature 1 00:00:00
      • Editing the feature 2 00:00:00
      • Measuring tools 00:00:00
      • Creating transformation by using translate/rotate tools 00:00:00
      • Creating transformation by using symmetry/axis-axis tools 00:00:00
      • Creating transformation by using mirror/scale tools 00:00:00
      • Creating rectangular pattern of features 00:00:00
      • Creating circular/user pattern of features 00:00:00
      • Example 1 00:00:00
      • Example 2 00:00:00
      • Example 3 00:00:00
      • Example 4 00:00:00
      • Example 5 00:00:00
      • Example 6 00:00:00
      • Example 7 00:00:00
      • Example 8 00:00:00
      • Example 9 00:00:00
      • Introduction to generative shape design i.e surfacing 00:00:00
      • Using wireframe tool point 00:00:00
      • Using wireframe tool line 00:00:00
      • Using wireframe tool plane 00:00:00
      • Using wireframe tool project combine 00:00:00
      • Using wireframe tool intersection and curve offset 00:00:00
      • Using wireframe tool circle and conic 00:00:00
      • Using wireframe tool curves 00:00:00
      • Creating offset surface 00:00:00
      • Creating surface by using sweep tool 00:00:00
      • Creating fill surface 00:00:00
      • Creating multi-section surface 00:00:00
      • Adding surface by blend tool 00:00:00
      • Using surface operation join, heal, dissemble tools 00:00:00
      • Using split and trim surface operations 00:00:00
      • Using boundary and extract tool 00:00:00
      • Creating surface fillets 00:00:00
      • Creating surface chamfer and extrapolate 00:00:00
      • Surface – Example 1 00:00:00
      • Using body in white tools 1 00:00:00
      • Using body in white tools 2 00:00:00
      • Creating geometrical set 00:00:00
      • Using tools toolbar in surface 00:00:00
      • Applying material to surface 00:00:00
      • Introduction to sheet metal design 00:00:00
      • Setting sheet parameter 00:00:00
      • Creating Sheet metal wall 00:00:00
      • Creating wall on edge 00:00:00
      • Creating Sheet metal extrusion Unlimited
      • Creating flange 00:00:00
      • Creating different types of flanges 00:00:00
      • Applying bends 00:00:00
      • Applying bend from flat 00:00:00
      • Using bending fold and unfold tools Unlimited
      • Using curve mapping tool 00:00:00
      • Creating rolled walls Hopper 00:00:00
      • Creating rolled walls free from surface 00:00:00
      • Creating surface stamp 00:00:00
      • Creating bead 00:00:00
      • Creating curve stamp 00:00:00
      • Crating flanged cutout 00:00:00
      • Introduction to assembly design 00:00:00
      • Inserting component in assembly 00:00:00
      • Manipulating component 00:00:00
      • Using snap tool for manipulation 00:00:00
      • Creating coincidence constraint 00:00:00
      • Creating offset constraint 00:00:00
      • Using reuse pattern tool 00:00:00
      • Using reuse pattern tool 00:00:00
      • Analyzing degree of freedom 00:00:00
      • Creating multi instantiation 00:00:00
      • Creating assembly by top-down assembly approach 00:00:00
      • Generating exploder view 00:00:00
      • Adding part in assembly environment 00:00:00
      • Replacing part, reordering components in specification tree 00:00:00
      • Generating numbering and bill of material 00:00:00
      • Creating scene 00:00:00
      • Splitting assembly 00:00:00
      • Creating assembly feature hole, pocket 00:00:00
      • Creating assembly feature symmetry 00:00:00
      • Assembly clash analysis 00:00:00
      • Creating assembly sectioning 00:00:00
      • Introduction to drafting 00:00:00
      • Creating views by view creation wizard 00:00:00
      • Creating view by advance front view 00:00:00
      • Adding projection view 00:00:00
      • Adding auxiliary view 00:00:00
      • Creating isometric view 00:00:00
      • Creating offset/aligned section view 00:00:00
      • Creating offset/aligned cut section view 00:00:00
      • Creating detail view 00:00:00
      • Creating clipping view 00:00:00
      • Creating broken view Part-1 00:00:00
      • Creating broken view Part-2 00:00:00
      • Creating breakout view 00:00:00
      • Adding 3D clipping 00:00:00
      • Adding new sheet 00:00:00
      • Generating dimension by auto dimension tool 00:00:00
      • Generating chained dimensions 00:00:00
      • Generating manual dimensions 00:00:00
      • Generating hole/point table 00:00:00
      • Editing dimensions 00:00:00
      • Generating GD&T frame 00:00:00
      • Using generation tools 00:00:00
      • Generating bill of material 00:00:00
      • Surface Example 2 00:00:00
      • Surface Example 3 00:00:00
      • Surface Example 4 00:00:00
      • Sheetmetal Example 1 00:00:00
      • Sheetmetal Example 2 00:00:00
      • Assembly Example 1 00:00:00
      • Assembly Example 2 00:00:00
      • FINAL TEST Unlimited
      • Course completion form 00:00:00
    top