0

  • No products in the cart.

NSDC AI AutoCAD, Solid Works, CATIA in Malayalam

Course Currilcum

    • Introduction – Part 1 00:06:34
    • Installation and AutoCAD User Interface 00:06:45
    • Tabs, Panels, Limits and Units 00:24:35
    • Navigation and Creating Templates 00:26:05
    • Line, Polyline, Circles 00:25:27
    • Triangle, Rectangle and Polygon 00:38:10
    • Arcs 00:25:24
    • Ellipse and Spline 00:22:58
    • Point and Revision Clouds 00:12:55
    • Construction Line and Ray – Part 1 00:09:38
    • Practice Questions Part 1 – Part 1 00:32:50
    • Practice Questions Part 2 – Part 1 00:12:14
    • Move and Copy 00:09:16
    • Trim and Extend – Part 1 00:14:43
    • Erase, Explode and Overkill – Part 1 00:08:57
    • Stretch Command, Break and Join 00:18:04
    • Lengthen and Reverse – Part 1 00:24:18
    • Creating basic Hatches 00:19:21
    • Set Origine and Associative Hatch 00:11:02
    • Practice Questions Part 1 – Part 2 00:19:01
    • Practice Questions Part 2 – Part 2 00:21:19
    • Mirror and Scale 00:22:54
    • Array 00:58:51
    • Fillet, Chamfer, Blend Curve 00:25:12
    • Layers Part 1 00:31:24
    • Layers Part 2 00:19:03
    • Layers Part 3 00:18:58
    • Dimensions Part 1 00:31:05
    • Dimensions Part 2 00:27:39
    • Practice Questions Part 1 – Part 3 00:01:04
    • Practice Questions Part 2 – Part 3 00:25:46
    • Table and Table styles 00:29:05
    • Block – Part 1 00:29:24
    • Text 00:16:17
    • Attributes part 1 00:13:18
    • Attributes part 2 00:36:35
    • Groups – Part 1 00:12:25
    • Practice Questions Part 1 – Part 4 00:01:22
    • Practice Questions Part 2 – Part 4 00:54:24
    • Isometric – Part 1 00:35:11
    • Parametric – Part 1 00:27:40
    • Page Setup,Layout,Plots 1 00:44:46
    • Understanding of co-ordinate system 00:18:16
    • Introduction – Part 2 00:10:02
    • Door and Window part 1 00:52:48
    • Basic civil plan 1 00:02:35
    • Window size and Ventilation 00:46:25
    • Door size and positon 00:47:10
    • Object placement 1 00:45:20
    • Object placement 2 00:44:17
    • Wall 00:47:07
    • House civil plan 1 00:29:48
    • House civil plan 2 00:01:05
    • practice qustion 1 00:35:33
    • practice qustion 2 00:21:38
    • practice qustion 3 00:42:12
    • practice qustion 4 00:01:12
    • practice qustion 6 00:01:37
    • practice qustion 7 00:58:50
    • 3D interface setting 00:39:03
    • Default tools – Part 1 00:30:41
    • Basic command 00:33:08
    • Object selection – Part 1 00:22:20
    • 2D Draw to 3D – Part 1 00:20:10
    • Adjust position 00:29:23
    • Press pull 00:30:51
    • Visual styile 00:33:42
    • practice example 1 – Part 1 00:26:35
    • RENDERING IN AUTOCAD 00:15:13
    • Solidworks introduction 00:39:35
    • studying interface 00:26:37
    • basic tools 00:29:04
    • Customizing command managers and toobar 00:25:06
    • User interface of solidworks 00:28:32
    • Star new file and Existing file 00:10:00
    • Keybord and Mouse 00:21:32
    • Planes 00:18:07
    • Sketch tab tools exercise 1 00:37:31
    • Sketch tab tools exercise 2 00:18:18
    • Sketch tab tools exercise 3 00:46:45
    • Sketch tab tools exercise 4 00:44:58
    • Sketch tab tools exercise 5 00:29:18
    • sketch editing tools 1 00:27:56
    • sketch editing tools 2 00:29:30
    • sketch editing tools 3 00:25:24
    • sketch editing tools 4 00:30:13
    • sketch editing tools 5 00:27:01
    • Rilation 1 00:21:56
    • Rilation 2 00:23:58
    • practice example 1 – Part 2 00:32:08
    • Practice example 2 – Part 1 00:37:18
    • Practice example 3 – Part 1 00:22:30
    • Practice example 4 – Part 1 00:28:04
    • Practice example 5 – Part 1 00:15:07
    • Editing and modifiying 00:21:02
    • linear sketch pattern 00:04:25
    • Fully Defining the Sketches – Part 1 00:06:33
    • Creating Revolved Features – Part 1 00:16:41
    • Initial basic settings in CATIA – Part 1 00:08:39
    • Predefined profiles tools1 – Part 1 00:05:24
    • Predefined profiles tools2 – Part 1 00:05:16
    • Drawing circle and arcs1 – Part 1 00:03:41
    • Using connect tool and drawing ellipse – Part 1 00:04:29
    • Using constraint tool in detail2 – Part 1 00:11:09
    • Example 1 – Part 1 00:15:26
    • Example 2 – Part 1 00:06:10
    • Example 3 – Part 1 00:05:44
    • Adding material by using pad tool 2 – Part 1 00:06:49
    • Removing material by using pocket tool – Part 1 00:03:52
    • Adding revolved material by using shaft tool – Part 1 00:09:19
    • Introduction to AutoCAD user interface Unlimited
    • AutoCAD Navigation Tools Unlimited
    • Understanding Co-ordinate system Unlimited
    • Limits and Units 00:36:56
    • Creating a Template 00:26:08
    • Making Lines Unlimited
    • Lines using Polar Unlimited
    • Circles in AutoCAD Unlimited
    • Arc in AutoCAD Unlimited
    • Ellipses Unlimited
    • Rectangles Unlimited
    • Introduction to Polyline and Spline Unlimited
    • Construction Line and Ray – Part 2 00:24:37
    • Move and Copy command Unlimited
    • Rotate command Unlimited
    • Offset command Unlimited
    • Trim and Extend – Part 2 00:14:43
    • Erase, Explode and Overkill – Part 2 00:08:57
    • Stretch command Unlimited
    • Break and Join Unlimited
    • Lengthen and Reverse – Part 2 00:24:18
    • Creating Basic Hatches Part Unlimited
    • Set Origin And Associative Hatch Unlimited
    • Layer Part Unlimited
    • Text Part Unlimited
    • Dimension Part Unlimited
    • Multileader Unlimited
    • Table & Table Styles Unlimited
    • Block – Part 2 00:30:13
    • Groups – Part 2 00:12:25
    • Attributes 00:30:09
    • AutoCAD Exercise 00:17:17
    • Isometric – Part 2 00:35:11
    • Parametric – Part 2 00:36:18
    • Page Setup, Layout & Plots 00:26:59
    • AutoCAD ‘Learn with Us’ Exercise 00:22:03
    • AutoCAD ‘Learn with Us’ Exercise – 3 Unlimited
    • Introduction to Civil Planning Unlimited
    • Basics of Civil Planning Part – 1 00:20:21
    • Basics of Civil Planning part – 2 00:01:04
    • Placement Theory Part – 1 Unlimited
    • Placement Theory Part – 2 00:06:53
    • Object Placement Theory Part – 1 00:09:49
    • Object Placement Theory Part – 2 Unlimited
    • Object Placement Theory Part – 3 00:08:31
    • Blocks, Attributes & Palletes Part – 1 – Part 1 00:03:31
    • Blocks, Attributes & Palletes Part – 2 – Part 1 00:17:33
    • Placement of components from Tool Palette Unlimited
    • Placement of components from Design Centre Unlimited
    • Section Drafting Unlimited
    • Staircase Calculation & Drafting Part – 1 Unlimited
    • Staircase Calculation & Drafting Part – 2 Unlimited
    • Elevation Part Unlimited
    • Elevation Part – 3 Unlimited
    • Detailing Part – 1 Unlimited
    • Detailing Part – 2 Unlimited
    • X-Ref Unlimited
    • 3D interface settings 00:05:37
    • Default tools – Part 2 00:08:35
    • Short commands 00:07:55
    • Object selection – Part 2 00:04:59
    • 2D Draw to 3D – Part 2 00:10:03
    • Adjust Positions Unlimited
    • Type of visual Styles Unlimited
    • 1. New page Unlimited
    • 2. Import Unlimited
    • 3. Save & Save as Unlimited
    • 4.Export Unlimited
    • Introduction to SOLIDWORKS 00:14:27
    • Customizing Command Managers and Toolbars in SOLIDWORKS 00:11:25
    • User Interface of SOLIDWORK 00:13:48
    • Starting a New File and Opening an Existing one in SOLIDWORKS 00:07:19
    • Entering the Sketching Environment 00:05:47
    • Creating Line, Centerline, and Midpoint Line 00:05:58
    • Creating Circles 00:04:59
    • Creating Arcs 00:04:01
    • Creating Rectangles 00:03:59
    • Creating Polygons 00:03:09
    • Creating Splines 00:02:02
    • Creating Slots 00:07:09
    • Placing Points 00:00:53
    • Creating Ellipses and Elliptical Arcs 00:06:51
    • Creating Parabolic and Conic Curves 00:07:21
    • Creating Equation Driven Curves 00:21:04
    • Drawing Display Tools 00:06:43
    • Deleting Sketching Entities 00:04:54
    • Trimming entities 00:11:36
    • extending entities 00:04:32
    • Filleting Entities 00:03:40
    • Offsetting Entities 00:08:02
    • Mirroring Entities 00:09:08
    • Dynamically Mirror Entities 00:12:02
    • Moving Entities 00:09:14
    • Rotating Entities 00:09:06
    • Scaling E ntities 00:03:04
    • Stretching entities 00:05:12
    • Copying and Pasting Entities 00:05:13
    • Creating Linear Pattern 00:14:04
    • Creating Circular Patterns 00:05:25
    • Modifying Sketch Patterns 00:00:00
    • Splitting Entities 00:04:45
    • Fully Defining the Sketches – Part 2 00:10:19
    • Creating Revolved Features – Part 2 00:30:29
    • Common introductory tools in CATIA – Part 1 00:08:01
    • Initial basic settings in CATIA – Part 2 00:17:35
    • Predefined profiles tools1 – Part 2 00:30:12
    • Predefined profiles tools2 – Part 2 00:12:00
    • Drawing circle and arcs1 – Part 2 00:25:24
    • Using connect tool and drawing ellipse – Part 2 00:14:48
    • Using constraint tool in detail2 – Part 2 00:06:12
    • Adding material by using pad tool 2 – Part 2 00:09:04
    • Removing material by using pocket tool – Part 2 00:11:09
    • Adding revolved material by using shaft tool – Part 2 00:10:21
    • Surface – Example 1 – Part 1 00:27:24
    • Creating offset/aligned cut section view – Part 1 00:04:38
    • Creating broken view Part – Part 1 Unlimited
    • Common introductory tools in CATIA – Part 2 Unlimited
    • Common introductory tools in CATIA – Part 3 Unlimited
    • Initial basic settings in CATIA – Part 3 Unlimited
    • Predefined profiles tools1 – Part 3 Unlimited
    • Predefined profiles tools2 – Part 3 Unlimited
    • Drawing circle and arcs1 – Part 3 Unlimited
    • Using connect tool and drawing ellipse – Part 3 Unlimited
    • Using constraint tool in detail2 – Part 3 Unlimited
    • Adding material by using pad tool 2 – Part 3 Unlimited
    • Removing material by using pocket tool – Part 3 Unlimited
    • Adding revolved material by using shaft tool – Part 3 Unlimited
    • Surface – Example 1 – Part 2 Unlimited
    • Generating manual dimensions – Part 1 00:04:05
    • Introduction to assembly design – Part 1 00:07:12
    • Inserting component in assembly – Part 1 00:11:50
    • Manipulating component – Part 1 00:06:45
    • Using snap tool for manipulation – Part 1 00:08:36
    • Creating coincidence constraint – Part 1 00:05:41
    • Creating offset constraint – Part 1 00:07:50
    • Using reuse pattern tool – Part 1 00:14:20
    • Analyzing degree of freedom – Part 1 00:06:29
    • Creating multi instantiation – Part 1 00:06:53
    • Creating assembly by top-down assembly approach – Part 1 00:10:07
    • Generating exploder view – Part 1 00:06:00
    • Adding part in assembly environment – Part 1 00:04:43
    • Replacing part, reordering components in specification tree – Part 1 00:03:45
    • Generating numbering and bill of material – Part 1 00:05:19
    • Creating scene – Part 1 00:04:45
    • Splitting assembly – Part 1 00:04:56
    • Creating assembly feature hole, pocket – Part 1 00:10:41
    • Creating assembly feature symmetry – Part 1 00:04:32
    • Assembly clash analysis – Part 1 00:03:59
    • Creating assembly sectioning – Part 1 00:04:16
    • Introduction to drafting – Part 1 00:06:36
    • Creating views by view creation wizard – Part 1 00:05:57
    • Creating view by advance front view – Part 1 00:04:55
    • Adding projection view – Part 1 00:04:03
    • Adding auxiliary view – Part 1 00:04:20
    • Creating isometric view – Part 1 00:03:15
    • Creating offset/aligned section view – Part 1 00:04:24
    • Creating offset/aligned cut section view – Part 2 00:03:03
    • Creating detail view – Part 1 00:05:13
    • Creating clipping view – Part 1 00:04:37
    • Creating broken view Part – Part 2 00:03:12
    • Creating broken view Part – Part 3 00:07:15
    • Creating breakout view – Part 1 00:03:48
    • Adding 3D clipping – Part 1 00:04:23
    • Adding new sheet – Part 1 00:03:04
    • Generating dimension by auto dimension tool – Part 1 00:08:11
    • Using generation tools – Part 1 00:04:21
    • Generating bill of material – Part 1 00:03:46
    • Surface Example 2 – Part 1 00:23:01
    • Surface Example 3 – Part 1 00:24:59
    • Surface Example 4 – Part 1 00:23:57
    • Sheetmetal Example 1 – Part 1 00:21:28
    • Sheetmetal Example 2 – Part 1 00:14:04
    • Assembly Example 1 – Part 1 00:11:49
    • Assembly Example 2 – Part 1 00:21:19
    • All About Chalo INDIA Startup Drive 00:03:50
    • AVODHA Official Malayalam YouTube Channel 00:00:49
    • Blocks, Attributes & Palletes Part – 1 – Part 2 00:03:31
    • Blocks, Attributes & Palletes Part – 2 – Part 2 00:17:33
    • Generating GD&T frame – Part 1 00:07:14
top