0

  • No products in the cart.

NSDC AutoCAD, Solid Works, CATIA in Malayalam

">

Course Currilcum

  • Elevation Part – 3 00:05:49
  • Detailing Part – 1 00:19:18
  • Detailing Part – 2 00:20:03
    • Tabs, Panels, Limits and Units – Part 1 00:24:35
    • Short commands 00:07:55
    • Navigation and Creating Templates – Part 1 00:26:05
    • Line, Polyline, Circles 00:25:27
    • Triangle, Rectangle and Polygon – Part 1 00:38:10
    • Arcs 00:25:24
    • Ellipse and Spline – Part 1 00:22:58
    • Point and Revision Clouds – Part 1 00:12:55
    • Construction Line and Ray – Part 1 00:09:38
    • Practice Questions Part 1 – Part 1 00:32:50
    • Practice Questions Part 2 – Part 1 00:12:14
    • QUIZ 1 00:01:00
    • Move and Copy – Part 1 00:09:16
    • Trim and Extend – Part 1 00:14:43
    • Erase, Explode and Overkill – Part 1 00:08:57
    • Stretch Command, Break and Join – Part 1 00:18:04
    • Lengthen and Reverse – Part 1 00:24:18
    • Creating basic Hatches – Part 1 00:19:21
    • Set Origine and Associative Hatch 00:11:02
    • Practice Questions Part 1 – Part 2 00:19:01
    • Practice Questions Part 2 – Part 2 00:21:19
    • Mirror and Scale 00:22:54
    • Array – Part 1 00:58:51
    • Fillet, Chamfer, Blend Curve – Part 1 00:25:12
    • Layers Part 1 – Part 1 00:31:24
    • Layers Part 2 – Part 1 00:19:03
    • Layers Part 3 00:18:58
    • Quiz 2 00:05:00
    • Quiz – 3 00:01:00
    • Dimensions Part 1 00:31:05
    • Dimensions Part 2 00:27:39
    • Practice Questions Part 1 – Part 3 00:01:04
    • Practice Questions Part 2 – Part 3 00:25:46
    • Table and Table styles 00:29:05
    • Block – Part 1 00:29:24
    • Text 00:16:17
    • Quiz – 5 00:06:00
    • Attributes part 1 00:13:18
    • Attributes part 2 – Part 1 00:36:35
    • Groups – Part 1 00:12:25
    • Practice Questions Part 1 – Part 4 00:01:22
    • Practice Questions Part 2 – Part 4 00:54:24
    • Isometric – Part 1 00:35:11
    • Parametric – Part 1 00:27:40
    • Page Setup,Layout,Plots 1 00:44:46
    • Understanding of co-ordinate system – Part 1 00:18:16
    • Introduction – Part 1 00:10:02
    • Door and Window part 1 00:52:48
    • Basic civil plan 1 00:02:35
    • Window size and Ventilation 00:46:25
    • Door size and positon 00:47:10
    • Object placement 1 00:45:20
    • Object placement 2 00:44:17
    • Wall – Part 1 00:47:07
    • House civil plan 1 00:29:48
    • House civil plan 2 00:01:05
    • practice qustion 1 00:35:33
    • practice qustion 2 00:21:38
    • practice qustion 3 00:42:12
    • practice qustion 4 00:01:12
    • 3. Save & Save as 00:08:40
    • practice qustion 6 00:01:37
    • practice qustion 7 00:58:50
    • 3D interface setting 00:39:03
    • Default tools – Part 1 00:30:41
    • Basic command 00:33:08
    • Object selection – Part 1 00:22:20
    • 2D Draw to 3D – Part 1 00:20:10
    • Adjust position – Part 1 00:29:23
    • Press pull 00:30:51
    • Visual styile – Part 1 00:33:42
    • practice example 1 – Part 1 00:26:35
    • RENDERING IN AUTOCAD – Part 1 00:15:13
    • Solidworks introduction – Part 1 00:39:35
    • studying interface – Part 1 00:26:37
    • basic tools – Part 1 00:29:04
    • Customizing command managers and toobar – Part 1 00:25:06
    • User interface of solidworks 00:28:32
    • Star new file and Existing file – Part 1 00:10:00
    • Keybord and Mouse – Part 1 00:21:32
    • Planes 00:18:07
    • Sketch tab tools exercise 1 – Part 1 00:37:31
    • Sketch tab tools exercise 2 – Part 1 00:18:18
    • Sketch tab tools exercise 3 – Part 1 00:46:45
    • Sketch tab tools exercise 4 – Part 1 00:44:58
    • Sketch tab tools exercise 5 00:29:18
    • sketch editing tools 1 00:27:56
    • sketch editing tools 2 – Part 1 00:29:30
    • sketch editing tools 3 00:25:24
    • sketch editing tools 4 – Part 1 00:30:13
    • sketch editing tools 5 – Part 1 00:27:01
    • Rilation 1 – Part 1 00:21:56
    • Rilation 2 – Part 1 00:23:58
    • practice example 1 – Part 2 00:32:08
    • Practice example 2 – Part 1 00:37:18
    • Practice example 3 – Part 1 00:22:30
    • Practice example 4 – Part 1 00:28:04
    • Practice example 5 – Part 1 00:15:07
    • Editing and modifiying 00:21:02
    • linear sketch pattern 00:04:25
    • Fully Defining the Sketches 00:06:33
    • Creating Revolved Features 00:16:41
    • Practice example 2 – Part 2 00:26:54
    • Practice example 3 – Part 3 00:04:26
    • INTRODUCTION TO CATIA – Part 1 00:04:43
    • Initial basic settings in CATIA – Part 1 00:08:39
    • Predefined profiles tools1 – Part 1 00:05:24
    • Predefined profiles tools2 – Part 1 00:05:16
    • Drawing circle and arcs1 – Part 1 00:03:41
    • Using connect tool and drawing ellipse – Part 1 00:04:29
    • Using constraint tool in detail2 – Part 1 00:11:09
    • Example 1 – Part 1 00:15:26
    • Example 2 – Part 1 00:06:10
    • Example 3 – Part 1 00:05:44
    • Adding material by using pad tool 2 – Part 1 00:06:49
    • Removing material by using pocket tool – Part 1 00:03:52
    • Adding revolved material by using shaft tool – Part 1 00:09:19
    • Introduction – AU001 00:06:34
    • Introduction – Part 2 00:18:52
    • AutoCAD ‘Learn with Us’ Exercise 00:27:47
    • AutoCAD ‘Learn with Us’ Exercise-3 00:38:58
    • Basics of Civil Planning part – 2 00:01:04
    • Placement Theory Part – 1 Unlimited
    • 3D interface settings 00:05:37
    • Adjust Positions Unlimited
    • practice example 1 – Part 8 00:01:03
    • Practice example 2 – Part 7 00:48:18
    • Type of visual Styles Unlimited
    • 1. New page Unlimited
    • 2. Import Unlimited
    • 4.Export Unlimited
    • Introduction to SOLIDWORKS 00:14:27
    • Customizing Command Managers and Toolbars in SOLIDWORKS 00:11:25
    • User Interface of SOLIDWORK 00:13:48
    • Starting a New File and Opening an Existing one in SOLIDWORKS 00:07:19
    • Entering the Sketching Environment 00:05:47
    • Creating Line, Centerline, and Midpoint Line 00:05:58
    • Creating Circles 00:04:59
    • Creating Arcs 00:04:01
    • Creating Rectangles 00:03:59
    • Creating Polygons 00:03:09
    • Creating Splines 00:02:02
    • Creating Slots 00:07:09
    • Placing Points 00:00:53
    • Creating Ellipses and Elliptical Arcs 00:06:51
    • Creating Parabolic and Conic Curves 00:07:21
    • Creating Equation Driven Curves 00:21:04
    • Drawing Display Tools 00:06:43
    • Deleting Sketching Entities 00:04:54
    • Trimming entities 00:11:36
    • extending entities 00:04:32
    • Filleting Entities 00:03:40
    • Creating chamfers – Part 1 00:08:43
    • Offsetting Entities 00:08:02
    • Mirroring Entities 00:09:08
    • Dynamically Mirror Entities 00:12:02
    • Moving Entities 00:09:14
    • Rotating Entities 00:09:06
    • Scaling Entities 00:10:23
    • Stretching entities 00:05:12
    • Copying and Pasting Entities 00:05:13
    • Creating Linear Pattern 00:14:04
    • Creating Circular Patterns 00:05:25
    • Modifying Sketch Patterns 00:00:00
    • Splitting Entities 00:04:45
    • Common introductory tools in CATIA – Part 1 00:08:01
    • Basic profile tools to draw sketches 2 Unlimited
    • Surface – Example 1 – Part 1 00:27:24
    • Creating offset/aligned cut section view – Part 1 00:04:38
    • Creating broken view Part – Part 1 Unlimited
    • Generating GD&T frame – Part 1 Unlimited
    • Installation and AutoCAD User Interface 00:06:45
    • Tabs, Panels, Limits and Units – Part 2 00:24:35
    • Navigation and Creating Templates – Part 2 00:26:13
    • Triangle, Rectangle and Polygon – Part 2 00:33:38
    • Ellipse and Spline – Part 2 00:22:58
    • Point and Revision Clouds – Part 2 00:29:08
    • Construction Line and Ray – Part 2 00:24:37
    • Move and Copy – Part 2 00:09:16
    • Trim and Extend – Part 2 00:14:43
    • Erase, Explode and Overkill – Part 2 00:08:57
    • Stretch Command, Break and Join – Part 2 00:18:04
    • Lengthen and Reverse – Part 2 00:24:18
    • Array – Part 2 00:35:36
    • Fillet, Chamfer, Blend Curve – Part 2 00:25:12
    • Creating basic Hatches – Part 2 00:37:35
    • Layers Part 2 – Part 2 00:25:21
    • Block – Part 2 00:30:13
    • Attributes part 2 – Part 2 00:45:06
    • Groups – Part 2 00:12:25
    • Isometric – Part 2 00:35:11
    • Parametric – Part 2 00:36:18
    • Understanding of co-ordinate system – Part 2 00:26:48
    • Limits and Units 00:36:56
    • Wall – Part 2 00:09:15
    • Default tools – Part 2 00:08:35
    • Object selection – Part 2 00:04:59
    • 2D Draw to 3D – Part 2 00:10:03
    • Adjust position – Part 2 00:09:41
    • basic tools – Part 2 00:22:34
    • Knowing JAP 00:03:24
    • Elaborating JAP 00:07:04
    • Introduction to AutoCAD user interface Unlimited
    • AutoCAD Navigation Tools Unlimited
    • Understanding Co-ordinate system Unlimited
    • Creating a Template 00:26:08
    • Making Lines Unlimited
    • Lines using Polar Unlimited
    • Circles in AutoCAD Unlimited
    • Arc in AutoCAD Unlimited
    • Ellipses Unlimited
    • Rectangles Unlimited
    • Introduction to Polyline and Spline Unlimited
    • Move and Copy command Unlimited
    • Rotate command Unlimited
    • Offset command Unlimited
    • Stretch command Unlimited
    • Break and Join Unlimited
    • Creating Basic Hatches Part Unlimited
    • Set Origin And Associative Hatch Unlimited
    • Layer Part Unlimited
    • Text Part Unlimited
    • Dimension Part Unlimited
    • Multileader Unlimited
    • Table & Table Styles Unlimited
    • Attributes 00:30:09
    • AutoCAD Exercise 00:17:17
    • Page Setup, Layout & Plots 00:26:59
    • Introduction to Civil Planning Unlimited
    • Basics of Civil Planning Part – 1 00:20:21
    • Placement Theory Part – 2 00:06:53
    • Object Placement Theory Part – 1 00:09:49
    • Object Placement Theory Part – 2 Unlimited
    • Object Placement Theory Part – 3 00:08:31
    • Blocks, Attributes & Palletes Part – 1 – Part 1 Unlimited
    • Blocks, Attributes & Palletes Part – 2 – Part 1 Unlimited
    • Placement of components from Tool Palette Unlimited
    • Placement of components from Design Centre Unlimited
    • Section Drafting Unlimited
    • Staircase Calculation & Drafting Part – 1 Unlimited
    • Staircase Calculation & Drafting Part – 2 Unlimited
    • Elevation Part Unlimited
    • X-Ref Unlimited
    • Scaling E ntities 00:03:04
    • INTRODUCTION TO CATIA – Part 3 Unlimited
    • Common introductory tools in CATIA – Part 2 Unlimited
    • Common introductory tools in CATIA – Part 3 Unlimited
    • Common introductory tools in CATIA-3 – Part 2 Unlimited
    • Initial basic settings in CATIA – Part 2 Unlimited
    • CATIA Sketcher workbench introduction – Part 2 Unlimited
    • Basic profile tools to draw sketches1 – Part 2 Unlimited
    • Basic profile tools to draw sketches2 – Part 2 Unlimited
    • Basic constraint tools1 – Part 2 Unlimited
    • Basic constraint tools2 – Part 2 Unlimited
    • Predefined profiles tools1 – Part 2 Unlimited
    • Predefined profiles tools2 – Part 2 Unlimited
    • Predefined profiles tools3 – Part 2 Unlimited
    • Drawing circle and arcs1 – Part 2 Unlimited
    • Drawing circle and arcs2 – Part 2 Unlimited
    • Using connect tool and drawing ellipse – Part 2 Unlimited
    • Drawing lines by line tool – Part 2 Unlimited
    • Drawing points – Part 2 Unlimited
    • Using constraint tool in detail1 – Part 2 Unlimited
    • Using constraint tool in detail2 – Part 2 Unlimited
    • Creating corner and chamfer operations – Part 2 Unlimited
    • Creating trim operations – Part 2 Unlimited
    • Using operation transformation tools1 – Part 2 Unlimited
    • Using operation transformation tools2 – Part 2 Unlimited
    • Using operation transformation tools3 – Part 2 Unlimited
    • Analyzing sketch – Part 2 Unlimited
    • Extracting sketch profiles – Part 2 Unlimited
    • Example 1 – Part 2 Unlimited
    • Example 2 – Part 2 Unlimited
    • Example 3 – Part 2 Unlimited
    • Adding material by using pad tool 1 – Part 2 Unlimited
    • Adding material by using pad tool 2 – Part 2 Unlimited
    • Adding material by using pad tool 3 – Part 2 Unlimited
    • Removing material by using pocket tool – Part 2 Unlimited
    • Adding revolved material by using shaft tool – Part 2 Unlimited
    • Removing material by groove tool – Part 2 Unlimited
    • Creating holes 1 – Part 2 Unlimited
    • Creating holes 2 – Part 2 Unlimited
    • Adding material along guide by rib tool 1 – Part 2 Unlimited
    • Adding material along guide by rib tool 2 – Part 2 Unlimited
    • Creating stiffening ribs – Part 2 Unlimited
    • Using solid combine tool – Part 2 Unlimited
    • Adding material by using multi-section tool 1 – Part 2 Unlimited
    • Adding material by using multi-section tool 2 – Part 2 Unlimited
    • Adding material by using multi-section tool 3 – Part 2 Unlimited
    • Adding material by using multi-section tool 4 – Part 2 Unlimited
    • Adding material by using multi-section tool 5 – Part 2 Unlimited
    • Adding material by using multi-section tool 6 – Part 2 Unlimited
    • Creating edge fillet 1 – Part 2 Unlimited
    • Creating edge fillet 2 – Part 2 Unlimited
    • Creating edge fillet 3 – Part 2 Unlimited
    • Creating fillets by face to face and tri-tangent tool – Part 2 Unlimited
    • Creating chamfers – Part 3 Unlimited
    • Creating draft 1 – Part 2 Unlimited
    • Creating draft 2 – Part 2 Unlimited
    • Creating shell on object – Part 2 Unlimited
    • Using thickness tool – Part 2 Unlimited
    • Applying threading/tapping – Part 2 Unlimited
    • Using remove face and replace face tools – Part 2 Unlimited
    • Using replace face tools – Part 2 Unlimited
    • Editing the feature 1 – Part 2 Unlimited
    • Editing the feature 2 – Part 2 Unlimited
    • Measuring tools – Part 2 Unlimited
    • Creating transformation by using translate/rotate tools – Part 2 Unlimited
    • Creating transformation by using symmetry/axis-axis tools – Part 2 Unlimited
    • Creating transformation by using mirror/scale tools – Part 2 Unlimited
    • Creating rectangular pattern of features – Part 2 Unlimited
    • Creating circular/user pattern of features – Part 2 Unlimited
    • Example 1 – Part 4 Unlimited
    • Example 2 – Part 4 Unlimited
    • Example 3 – Part 4 Unlimited
    • Example 4 – Part 2 Unlimited
    • Example 5 – Part 2 Unlimited
    • Example 6 – Part 2 Unlimited
    • Example 7 – Part 2 Unlimited
    • Example 8 – Part 2 Unlimited
    • Example 9 – Part 2 Unlimited
    • Introduction to generative shape design i.e surfacing – Part 2 Unlimited
    • Using wireframe tool point – Part 2 Unlimited
    • Using wireframe tool line – Part 2 Unlimited
    • Using wireframe tool plane – Part 2 Unlimited
    • Using wireframe tool project combine – Part 2 Unlimited
    • Using wireframe tool intersection and curve offset – Part 2 Unlimited
    • Using wireframe tool circle and conic – Part 2 Unlimited
    • Using wireframe tool curves – Part 2 Unlimited
    • Creating offset surface – Part 2 Unlimited
    • Creating surface by using sweep tool – Part 2 Unlimited
    • Creating fill surface – Part 2 Unlimited
    • Creating multi-section surface – Part 2 Unlimited
    • Adding surface by blend tool – Part 2 Unlimited
    • Using surface operation join, heal, dissemble tools – Part 2 Unlimited
    • Using split and trim surface operations – Part 2 Unlimited
    • Using boundary and extract tool – Part 2 Unlimited
    • Creating surface fillets – Part 2 Unlimited
    • Creating surface chamfer and extrapolate – Part 2 Unlimited
    • Surface – Example 1 – Part 2 Unlimited
    • Using body in white tools 1 – Part 2 Unlimited
    • Using body in white tools 2 – Part 2 Unlimited
    • Creating geometrical set – Part 2 Unlimited
    • Using tools toolbar in surface – Part 2 Unlimited
    • Applying material to surface – Part 2 Unlimited
    • Introduction to sheet metal design – Part 2 Unlimited
    • Setting sheet parameter – Part 2 Unlimited
    • Creating Sheet metal wall – Part 2 Unlimited
    • Creating wall on edge – Part 2 Unlimited
    • Creating Sheet metal extrusion – Part 2 Unlimited
    • Creating flange – Part 2 Unlimited
    • Creating different types of flanges – Part 2 Unlimited
    • Applying bends – Part 2 Unlimited
    • Applying bend from flat – Part 2 Unlimited
    • Using bending fold and unfold tools – Part 2 Unlimited
    • Using curve mapping tool – Part 2 Unlimited
    • Creating rolled walls Hopper – Part 2 Unlimited
    • Creating rolled walls free from surface – Part 2 Unlimited
    • Creating surface stamp – Part 2 Unlimited
    • Creating bead – Part 2 Unlimited
    • Creating curve stamp – Part 2 Unlimited
    • Crating flanged cutout – Part 2 Unlimited
    • Generating manual dimensions – Part 2 Unlimited
    • Introduction to assembly design – Part 2 Unlimited
    • Inserting component in assembly – Part 2 Unlimited
    • Manipulating component – Part 2 Unlimited
    • Using snap tool for manipulation – Part 2 Unlimited
    • Creating coincidence constraint – Part 2 Unlimited
    • Creating offset constraint – Part 2 Unlimited
    • Using reuse pattern tool – Part 3 Unlimited
    • Using reuse pattern tool – Part 4 Unlimited
    • Analyzing degree of freedom – Part 2 Unlimited
    • Creating multi instantiation – Part 2 Unlimited
    • Creating assembly by top-down assembly approach – Part 2 Unlimited
    • Generating exploder view – Part 2 Unlimited
    • Adding part in assembly environment – Part 2 Unlimited
    • Replacing part, reordering components in specification tree – Part 2 Unlimited
    • Generating numbering and bill of material – Part 2 Unlimited
    • Creating scene – Part 2 Unlimited
    • Splitting assembly – Part 2 Unlimited
    • Creating assembly feature hole, pocket – Part 2 Unlimited
    • Creating assembly feature symmetry – Part 2 Unlimited
    • Assembly clash analysis – Part 2 Unlimited
    • Creating assembly sectioning – Part 2 Unlimited
    • Introduction to drafting – Part 2 Unlimited
    • Creating views by view creation wizard – Part 2 Unlimited
    • Creating view by advance front view – Part 2 Unlimited
    • Adding projection view – Part 2 Unlimited
    • Adding auxiliary view – Part 2 Unlimited
    • Creating isometric view – Part 2 Unlimited
    • Creating offset/aligned section view – Part 2 Unlimited
    • Creating offset/aligned cut section view – Part 2 Unlimited
    • Creating detail view – Part 2 Unlimited
    • Creating clipping view – Part 2 Unlimited
    • Creating broken view Part – Part 2 Unlimited
    • Creating broken view Part – Part 3 Unlimited
    • Creating breakout view – Part 2 Unlimited
    • Adding 3D clipping – Part 2 Unlimited
    • Adding new sheet – Part 2 Unlimited
    • Generating dimension by auto dimension tool – Part 2 Unlimited
    • Using generation tools – Part 2 Unlimited
    • Generating bill of material – Part 2 Unlimited
    • Surface Example 2 – Part 2 Unlimited
    • Surface Example 3 – Part 2 Unlimited
    • Surface Example 4 – Part 2 Unlimited
    • Sheetmetal Example 1 – Part 2 Unlimited
    • Sheetmetal Example 2 – Part 2 Unlimited
    • Assembly Example 1 – Part 2 Unlimited
    • Assembly Example 2 – Part 2 Unlimited
    • All About Chalo INDIA Startup Drive 00:03:50
    • AVODHA Official Malayalam YouTube Channel 00:00:49
    • Blocks, Attributes & Palletes Part – 1 – Part 2 Unlimited
    • Blocks, Attributes & Palletes Part – 2 – Part 2 Unlimited
    • Generating GD&T frame – Part 3 Unlimited
top