0

  • No products in the cart.

NSDC AI AutoCAD, 3ds Max, Revit in Malayalam

Course Currilcum

  • AutoCAD Navigation Tools – Part 1 Unlimited
  • Introduction to AutoCAD user interface – Part 1 Unlimited
  • Lines using Polar – Part 1 Unlimited
  • Understanding Co-ordinate system – Part 1 Unlimited
  • Limits and Units – Part 1 Unlimited
  • Creating a Template – Part 1 Unlimited
  • All About Chalo INDIA Startup Drive Unlimited
  • AVODHA Official Malayalam YouTube Channel Unlimited
  • Making Lines – Part 1 Unlimited
  • Circles in AutoCAD – Part 1 Unlimited
  • Arc in AutoCAD – Part 1 Unlimited
  • Ellipses – Part 1 Unlimited
  • Rectangles – Part 1 Unlimited
  • Introduction to Polyline and Spline – Part 1 Unlimited
  • Points and Revision Clouds – Part 1 Unlimited
  • Construction Line and Ray – Part 1 Unlimited
  • Move and Copy command – Part 1 Unlimited
  • Rotate command – Part 1 Unlimited
  • Offset command – Part 1 Unlimited
  • Trim and Extend – Part 1 Unlimited
  • Quiz-1 00:03:00
  • Erase Explode and Overkill Unlimited
  • Stretch Command – Part 1 Unlimited
  • Break and Join – Part 1 00:04:44
  • Lengthen and Reverse – Part 1 00:06:47
  • Creating Basic Hatches Part – Part 1 00:08:10
  • Quiz-2 00:05:00
  • Set Orgin and Associative Hatch 00:04:41
  • Layer Part – Part 1 00:23:10
  • Layer Part – Part 2 00:17:34
  • Text Partt 00:14:11
  • Table and Table Styles – Part 1 00:29:05
  • Block – Part 1 00:19:19
  • Groups – Part 1 00:05:11
  • Attributes – Part 1 00:24:57
  • Autocad Exercise – Part 1 00:18:38
  • Autocad Exercise – Part 2 00:17:11
  • Isometric – Part 1 00:19:52
  • Parametrics 00:22:04
  • Page Setup,Layout and Plots 00:26:53
  • Introduction to Civil Planning – Part 1 00:24:29
  • Basic of Civil Planning Part-1 00:20:15
  • Basic of Civil Planning Part-2 00:00:58
  • Placement Theory – Part 1 00:08:33
  • Placement Theory – Part 2 00:06:47
  • Object Placement Theory – Part 1 00:09:43
  • Object Placement Theory Part-2 00:05:35
  • Object Placement Theory Part-3 00:08:25
  • Quiz-3 00:02:00
  • Blocks, Attributes and Palletes 00:03:39
  • Blocks, Attributes and Palletes Part-2 00:17:28
  • Placement of Components from Design Centre – Part 1 00:04:48
  • Placement of Components from Tool Palette – Part 1 00:17:27
  • Section Drafting – Part 1 00:32:34
  • Staircase Calculation and Drafting 00:11:28
  • Staircase Calculation and Drafting Part-2 00:18:35
  • Elevation – Part 1 00:17:08
  • Elevation Part-2 00:06:55
  • Elevation Part-3 00:05:49
  • Detailing Part-1 00:19:18
  • Detailing Part-2 00:20:03
  • X-Ref – Part 1 00:19:24
  • Interface – Part 1 00:23:13
  • 3Ds max and Vray installation 00:01:22
  • Introduction For 3Ds max 00:01:06
  • Gride – Part 1 00:18:50
  • Basic Tools-1 00:42:03
  • Basic Tools-2 00:36:41
  • Modify Tools -1 00:41:48
  • Modify Tools -2 00:57:53
  • Plan Import 00:33:57
  • House Wall Modeling 00:02:20
  • 3D Drawing Import – Part 1 00:16:50
  • 3D Drawing 2 00:06:08
  • Sketchup model Importing 00:18:59
  • Single Story House Design 00:40:44
  • Double Story House Design – Part 1 00:01:02
  • 3 Story House Design 00:43:09
  • Villa Import 1 00:07:27
  • Add Material – Part 1 00:20:25
  • Modifi Material 00:50:41
  • Edit villa 1 00:21:49
  • Quiz-4 00:02:00
  • Modify Villa – Part 1 00:15:09
  • Exterior 00:41:50
  • Sun arrangements – Part 1 00:13:56
  • Shadows – Part 1 00:10:33
  • V ray camera – Part 1 00:18:32
  • Molds Modeling – Part 1 00:37:49
  • Mechanical Modeling – Part 1 00:40:25
  • Controlling Views – Part 1 00:01:00
  • Render Settings – Part 1 00:08:24
  • Advanced Render Commands 00:01:26
  • Final Rendering – Part 1 00:04:40
  • Residential Modeling – Part 1 00:29:51
  • Redering – Part 1 00:18:26
  • Introduction – Part 1 00:08:53
  • Sloping roof – Part 1 00:07:49
  • Flat Roof – Part 1 00:21:09
  • Tools – Part 1 00:17:33
  • Apartment Modelling – Part 1 00:23:51
  • Main Tools – Part 1 00:08:25
  • Tool Bars – Part 1 00:35:09
  • Sketchup Installation – Part 1 00:22:33
  • Plugins – Part 1 00:19:43
  • Cad File Import – Part 1 00:49:32
  • Scale setup – Part 1 00:31:41
  • Save File – Part 1 00:39:40
  • Exterior Designing – Part 1 00:58:20
  • Exterior Designing Part – Part 1 00:21:08
  • Exterior Designing Part-3 – Part 1 00:17:34
  • Exterior Designing Part-4 – Part 1 00:16:06
  • Exterior Designing Part-5 – Part 1 00:12:44
  • Exterior Designing Part-6 – Part 1 00:40:02
  • 3D Structure – Part 1 00:47:00
  • Cad plan imparting 00:02:20
  • Interface Arrangement 00:01:50
  • Interior Designing – Part 1 00:57:24
  • Objects and Furniture Arrangement – Part 1 00:24:25
  • Sealing Setup – Part 1 00:37:58
  • Lighting – Part 1 00:40:47
  • 3D Texting – Part 1 00:08:39
  • Interior Materials 00:19:40
  • Type of Lights – Part 1 00:02:57
  • Rectangular Light – Part 1 00:03:50
  • Sphere light – Part 1 00:03:00
  • Spot Light – Part 1 00:05:13
  • IES Light – Part 1 00:22:45
  • Omni Light – Part 1 00:09:42
  • Dome Light – Part 1 00:25:32
  • Plugins – Part 2 00:19:43
  • V ray – Part 1 00:15:23
  • Laubwerk – Part 1 00:22:02
  • Render Settings – Part 2 00:08:24
  • Background Settings – Part 1 00:01:25
  • HDRI Sky Setups – Part 1 00:01:49
  • Landscape Design – Part 1 00:51:08
  • Trees and Plants – Part 1 00:02:00
  • Reflections – Part 1 00:14:35
  • Bed Room Designing – Part 1 00:11:34
  • Add Bedroom Furniture – Part 1 00:37:58
  • Add room Lights 00:19:02
  • Chapter 8 00:02:20
  • Commercial Buildings 00:01:46
  • Parking Area 00:01:49
  • 3D Software’s Downloading – Part 1 00:22:33
  • Kitchen 00:01:25
  • Plunging Downloading 00:40:57
  • Half Wall Design 00:24:25
  • Single Story Half Wall 00:02:20
  • Double Story Half Wall 00:01:30
  • 3D Software’s Downloading – Part 2 00:22:33
  • BIM & REVIT 00:21:02
  • Interface & Navigation, File formats 00:14:15
  • Selection, Options (Software settings) 00:20:25
  • Keyboard shortcuts(commands), Browser organisation & Duplicating views 00:15:17
  • Levels, Grid lines, Use of temporary dimensions, Adding columns 00:20:52
  • Adding walls, Wall properties, Using snaps 00:29:02
  • Wall families, Wall sweeps and reveals, Curtain walls 00:01:08
  • Slanted walls & Tapered walls, Some modification 00:17:33
  • Modify tools, Adding doors & windows, Plumbing fixtures, Constraints 00:28:54
  • Adding rooms & Room tags – Part 1 00:17:02
  • Adding and editing stairs, Railings 00:33:00
  • Materials, Creating materials, Applying materials 00:31:19
  • Massing & Site – Part 1 00:17:01
  • Design options – Part 1 00:08:41
  • Object styles, Visibility graphics & View template 00:17:01
  • Hiding & isolating objects, View extents & crop regions, View range 00:17:37
  • Section Box and Graphical Display Options 00:28:08
  • Creating 3D views, Section views, Walkthroughs, Tile windows 00:27:16
  • TAGS AND SCHEDULES,MATERIAL TAKE OFF 00:30:05
  • TEXTS,DIMENSIONS AND SYMBOLS – Part 1 00:21:11
  • LEGENDS,CALL OUT 00:18:22
  • Exterior and interior rendering 00:54:38
  • SHEETS & PLOT & EXPORTING 00:46:02
  • Revit Session :2 The Project Browser, 2D & 3D Navigation 00:14:37
  • Revit Session :3 : File Formats – Projects, Templates & Families 00:23:41
  • Revit Session 4: Unit set up & All about Parameters 00:29:52
  • Revit Session 5: Model vs Detail Elements 00:11:47
  • Revit Session 6 : Levels, Reference Planes & Structural Grids 00:15:17
  • Revit Session 7: Importing and linking files from CAD 00:18:29
  • Revit Session 8 : Walls & Family types 00:24:05
  • Revit Session 9: Wall Openings, Slanted walls & Tapered walls 00:21:24
  • Revit Session 10:Curtain Walls & Parameter addition in walls 00:13:42
  • Revit Session 11: Floors, Doors & Windows 00:17:00
  • Revit Session 12:Ceilings, Fixture to Ceilings & Shaft Openings 00:15:21
  • Revit Session 13: Roofs: Roof by Footprint & Roof by Extrusion 00:16:04
  • Revit Session 14:Types of Roofs and Dormer openings 00:17:26
  • Revit Session 15:Stairs, Railings, Ramps 00:20:56
  • Revit Session 16:Architectural & Structural Columns 00:12:32
  • Revit Session 17:Components, Model Lines & Model text 00:20:38
  • Revit Session 18:Basic Commands Part 1 – Move, Copy, Rotate Elements. 00:13:13
  • Revit Session 19:Basic Commands part 2 – Trim, Offset, Pin, Align & Split Elements 00:14:46
  • Revit Session 20: Mirroring Elements & Arrays (Linear and Radial) for interior spacing 00:10:57
  • Revit Session: 21 Massing and Site – Toposurface 00:14:01
  • Revit Session 22:Elevations, Sections, Drafting View & Section Boxes 00:11:54
  • Revit Session 23:3D, Camera Views, Graphics & Visibility Settings 00:18:10
  • Revit Session 24: Crop Regions, Legend Views & Callouts 00:15:14
  • Revit Session 25: Material application and creation, Rendering settings. 00:29:06
  • Revit Session 26: Walk-through settings and Animation. 00:16:32
  • Revit Session 27: Dimensions, Text, Filled Regions 00:13:57
  • Revit Session 28: Rooms, Tags 00:10:21
  • Revit Session 29:Sheets & Plot 00:16:12
  • Revit Session 30:Schedules -Cost Estimate, Quantity Estimate & Exporting 00:19:57
  • Advanced Session 1 : Generic Models with Extrusion 00:12:11
  • Advanced Session 2: Models Using Sweep 00:14:14
  • Advanced Session 3:Precast MODEL Pillars with Revolve 00:11:39
  • Advanced Session 4:Types of shades for Modern villas Unlimited
  • Advanced Session 5: Generic Models with Blend 00:07:04
  • Advanced Session 6 :Apartment creation 00:11:33
  • Advanced Session 7: Twisted Building 00:13:23
  • Advanced Session 8: Cone Shape Building 00:13:15
  • Advanced Session 9: Interior – False Ceiling 00:16:06
  • Advanced Session 10: Interior lighting 00:15:38
  • Advanced Session 11: Parametric Family 00:13:59
  • Advanced Session 12: Family Creation : Case Work :1 00:09:49
  • Advanced Session 13: Family Creation : Case Work :2 00:07:55
  • Advanced Session 14:Family Creation : Case Work :3 00:12:17
  • Advanced Session 15:Family Creation : Case Work :4 00:08:45
  • Session 1 :Introduction to 3D interface & 3D Shapes 00:13:33
  • Session 2: 3D Modelling Solid and Surface – Region and Boundary 00:12:56
  • Session 3: 3D solid creation from sketch 00:09:33
  • Session 4: Solid Editing – Faces and Edges 00:13:38
  • Session 5 :Solid Editing – Boolean Operations 00:09:48
  • Session 6: Solid Editing – Loft 00:14:55
  • Session 7: Solid Editing – Sweep 00:11:51
  • Session 8 – Solid Editing – Revolve 00:13:31
  • Session9 – Modification – Fillet and Chamfer 00:12:11
  • Session 10 – 3D Models – Grouping 00:15:18
  • Session 11 – Layer creation and Assigning 00:14:47
  • Session 12- Basement creation 00:09:28
  • Session 13 – Pillar & Beam Creation 00:06:30
  • Session 14 – Wall creation 00:17:21
  • Session 15 – Flat and Slope shade creation 00:09:56
  • Session 16 : Roof – Flat and Slope Roof Creation 00:14:21
  • Session 17 :Parapet and site creation 00:16:35
  • Session 18 – Material application 00:17:27
  • Session 19-Light settings 00:07:43
  • Session 20 – Render set up & Export to Image Format 00:16:20
  • Budget Homes Designs Part 1 00:02:16
  • Budget Homes Designs Part 2 00:02:56
  • Budget Homes Designs Part 3 00:02:20
  • Budget Homes Designs Part 4 00:02:08
  • Budget Homes Designs Part 5 00:02:56
  • Software downloading process 00:09:23
  • Introduction of ARTIFICIAL INTELLIGENCE (AI) 00:14:36
  • How to use AI in AutoCAD 00:06:44
    • AI In AutoCAD Civil Plan part 1 00:19:49
    • AI in AutoCAD Civil plan part 2 00:25:22
    • Finding Plan measurements With AI 00:03:21
    • Predictive Commands and Auto-complete 00:20:10
    • AI-assisted drafting & smart object recognition 00:24:03
    • Add-ons & plugins that use AI 00:11:11
    • Material prediction & auto-texturing 00:36:27
    • Quiz-5 00:02:00
    • AI-based Lighting and Scene Optimization 00:29:36
    • Auto animation tools 00:12:48
    • How to use AI app chatGPT 00:06:45
    • Auto creation of a Elevation 00:20:25
    • Auto creation of a section plan 00:13:41
    • Auto creation of a 3d plan 00:21:28
    • Auto creation of materials – Part 1 00:17:58
    • Sample rendering with AI 00:21:20
    • How to use AI in revit software 00:17:17
    • Predictive energy modeling and performance analysis 00:36:50
    • How to use AI in REVIT 00:17:43
    • Automating repetitive drafting tasks with AI 00:18:24
    • Automatic creation of REVIT drawing 00:19:04
    • Automatic calculation of a object part 1 00:12:53
    • Automatic Calculation of a object part 2 00:13:50
    • AI in AutoCAD 00:11:03
    • AI in 3dsmax 00:45:30
    • AI in REVIT 00:16:02
    • Introduction to Generative Design with AI 00:11:54
    • AI for Error Detection in Drawings 00:09:12
    • AI-powered Design Suggestions (smart alternatives) 00:26:01
    • AI for Cost Estimation of Designs 00:23:05
    • Voice Commands in AutoCAD with AI 00:19:44
    • Automatic Dimensioning with AI Tools 00:20:21
    • AI-based Clash Detection in Civil Plans 00:22:16
    • Smart Layer Management with AI 00:10:35
    • AI for Faster Rendering in 3ds Max 00:12:40
    • Quiz-6 00:02:00
    • AI-powered Physics & Motion Simulation 00:07:50
    • AI for Automatic Structural Analysis in Revit 00:07:06
    • Unit 15: AI-based Space Utilization Analysis in Revit 00:08:36
    • Introduction of 3ds Max 00:29:09
    • AutoCAD Navigation Tools – Part 2 Unlimited
    • Introduction to AutoCAD Interface 00:01:17
    • Introduction to AutoCAD user interface – Part 2 Unlimited
    • Lines using Polar – Part 2 Unlimited
    • Understanding Co-ordinate system – Part 2 Unlimited
    • Creating a Template – Part 2 00:26:08
    • Making Lines – Part 2 Unlimited
    • Circles in AutoCAD – Part 2 Unlimited
    • Arc in AutoCAD – Part 2 Unlimited
    • Ellipses – Part 2 Unlimited
    • Rectangles – Part 2 Unlimited
    • Introduction to Polyline and Spline – Part 2 Unlimited
    • Points and Revision Clouds – Part 2 00:12:55
    • Construction Line and Ray – Part 2 00:24:37
    • Move and Copy 00:09:16
    • Set Origine and Associative Hatch 00:11:02
    • Rotate and Offset Command 00:12:44
    • Trim and Extend – Part 2 00:14:43
    • Erase, Explode and Overkill 00:08:57
    • Stretch Command, Break and Join 00:18:04
    • Lengthen and Reverse – Part 2 00:24:18
    • Move and Copy command – Part 2 Unlimited
    • Rotate command – Part 2 Unlimited
    • Offset command – Part 2 Unlimited
    • Stretch Command – Part 2 Unlimited
    • Break and Join – Part 2 00:04:44
    • Creating Basic Hatches Part – Part 2 00:08:10
    • Table and Table Styles – Part 2 00:29:05
    • Block – Part 2 00:30:13
    • Groups – Part 2 00:12:25
    • Attributes – Part 2 00:30:09
    • Autocad Exercise – Part 3 00:18:38
    • Isometric – Part 2 00:35:11
    • Introduction to Civil Planning – Part 2 00:24:29
    • Placement Theory – Part 3 00:08:33
    • Object Placement Theory – Part 2 00:05:35
    • Placement of Components from Design Centre – Part 2 00:04:48
    • Placement of Components from Tool Palette – Part 2 00:17:27
    • Section Drafting – Part 2 00:32:34
    • Elevation – Part 2 00:06:55
    • X-Ref – Part 2 00:19:24
    • Interface – Part 2 00:44:59
    • Gride – Part 2 00:18:50
    • 3D Drawing Import – Part 2 00:38:15
    • Double Story House Design – Part 2 00:01:02
    • Add Material – Part 2 00:20:25
    • Modify Villa – Part 2 00:15:09
    • Sun arrangements – Part 2 00:13:56
    • Shadows – Part 2 00:10:33
    • V ray camera – Part 2 00:18:32
    • Molds Modeling – Part 2 00:37:49
    • Residential Modeling – Part 2 00:29:51
    • Mechanical Modeling – Part 2 00:40:25
    • Render Settings – Part 3 00:08:24
    • Final Rendering – Part 2 00:04:40
    • Controlling Views – Part 2 00:01:00
    • Redering – Part 2 00:18:26
    • Sloping roof – Part 2 00:07:49
    • Flat Roof – Part 2 00:21:09
    • Introduction – Part 2 00:18:52
    • Tools – Part 2 00:47:02
    • Apartment Modelling – Part 2 00:23:51
    • Sketchup Installation – Part 2 00:22:33
    • Tool Bars – Part 2 00:35:09
    • Main Tools – Part 2 00:08:25
    • Plugins – Part 3 00:19:43
    • Cad File Import – Part 2 00:49:32
    • Scale setup – Part 2 00:31:41
    • Save File – Part 2 00:39:40
    • Exterior Designing – Part 2 00:21:08
    • Exterior Designing Part – Part 2 00:21:08
    • Exterior Designing Part-3 – Part 2 00:17:34
    • Exterior Designing Part-4 – Part 2 00:16:06
    • Exterior Designing Part-5 – Part 2 00:12:44
    • Exterior Designing Part-6 – Part 2 00:40:02
    • 3D Structure – Part 2 00:47:00
    • Interior Designing – Part 2 00:57:24
    • Objects and Furniture Arrangement – Part 2 00:24:25
    • Sealing Setup – Part 2 00:37:58
    • Lighting – Part 2 00:40:47
    • 3D Texting – Part 2 00:08:39
    • Type of Lights – Part 2 00:02:57
    • Rectangular Light – Part 2 00:03:50
    • Sphere light – Part 2 00:03:00
    • Spot Light – Part 2 00:05:13
    • IES Light – Part 2 00:22:45
    • Omni Light – Part 2 00:09:42
    • Dome Light – Part 2 00:17:23
    • V ray – Part 2 00:15:23
    • Laubwerk – Part 2 00:22:02
    • Background Settings – Part 2 00:01:25
    • HDRI Sky Setups – Part 2 00:01:49
    • Landscape Design – Part 2 00:51:08
    • Trees and Plants – Part 2 00:02:00
    • Reflections – Part 2 00:14:35
    • Bed Room Designing – Part 2 00:11:34
    • Add Bedroom Furniture – Part 2 00:37:58
    • Massing & Site – Part 2 00:04:45
    • Design options – Part 2 00:04:33
    • TEXTS,DIMENSIONS AND SYMBOLS – Part 2 00:08:40
    • 3dsmax installaion 00:39:26
    • Introduction of V-Ray and Installation 00:28:36
    • Auto creation of materials – Part 2 00:31:45
    • Drafting part 2 00:30:28
    • Elevation 1 00:30:22
    • Detailing 1 00:25:40
    • Detailing 2 00:31:57
    • Modify tool part 2 00:57:53
    • House Wall Modelling 00:57:22
    • DOORS AND WINDOWS 00:59:11
    • DOORS MODELING SAMPLE 00:40:07
    • WINDOWS MODELING SAMPLE 00:41:56
    • FOUNDATION CREATION 00:35:44
    • FLAT ROOF MODELING 00:26:55
    • SLOPED ROOF MODELING 00:44:42
    • DIFFERENT TYPES OF ROOFS 00:43:34
    • FURNITURE MODELING SAMPLE1 00:45:48
    • FURNITURE MODELING SAMPLE2 00:40:30
    • FURNITURE MODELING SAMPLE3 00:44:27
    • FURNITURE MODELING SAMPLE4 00:48:11
    • ADD MATERIAL 1 00:20:19
    • ADD MATERIAL 2 00:32:04
    • ADD MATERIAL 3 00:38:30
    • ADD MATERIAL 4 00:32:28
    • 3D FILE IMPORT 00:32:23
    • LIGHT PART-1 00:47:54
    • LIGHT PART-2 00:35:57
    • V-RAY LIGHT 00:30:02
    • CAMERA SETUP 00:38:22
    • V-RAY CAMERA SETUP 00:32:24
    • SUN ARRANGEMENT 00:40:41
    • RENDERING SETUP -1 00:33:50
    • RENDERING SETUP-2 00:22:23
    • Introduction of sketchup – Part 1 00:36:35
    • Introduction of sketchup – Part 2 00:29:45
    • Main Tools part 1 – Part 1 00:24:24
    • Main Tools part 1 – Part 2 00:30:36
    • Advance render commands 2 00:17:53
    • Rendring 00:19:24
    • Apartment Modelling 2 00:29:24
    • Plugins Part 1 00:40:41
    • installation of autocad 00:23:48
    • AutoCAD User Interface 00:24:45
    • Tabs, Panels, Limits and Units 00:24:35
    • Navigation and Creating Templates 00:26:13
    • Line, line type 00:10:25
    • Polyline, 00:18:14
    • Circles 00:23:42
    • Triangle, Rectangle and Polygon 00:33:38
    • Arc 00:29:53
    • Ellipse and Spline 00:22:58
    • Point and Revision Clouds 00:29:08
    • Understanding of co-ordinate system 00:26:48
    • Limits and Units – Part 2 00:36:56
    • Practice Questions Part 2 00:54:24
    • Mirror and Scale 00:22:54
    • Fillet, Chamfer, Blend Curve 00:25:12
    • Creating basic Hatches 00:37:35
    • simple practice 1 00:33:33
    • Layers Part 2 00:25:21
    • Layers Part 3 00:18:58
    • single line text 00:20:13
    • Attributes part 1 00:13:18
    • Attributes part 2 00:45:06
    • Autocad exercise 1 00:27:15
    • Autocad exercise 2 00:36:55
    • Autocad exercise 4 00:42:38
    • Page Setup 00:31:00
    • Layout 00:36:14
    • Plote 00:22:36
    • Placement theory part 1 00:08:33
    • Object placemnt theory part 1 00:11:06
    • Object placemnt theory part 2 00:11:54
    • Object placemnt theory part 3 00:11:58
    • Block,attribute &pallets 1 00:13:30
    • Block,attribute &pallets 2 00:31:26
    • Placement components from design center 00:12:39
    • Placement components from tool palette 1 00:18:32
    • Placement components from tool palette 2 00:22:06
    • Section drafting 1 00:22:10
    • Section drafting 2 00:44:54
    • Stair calculation 1 00:24:22
    • Stair calculation 2 00:20:36
    • Rectangular Light -1 00:03:50
top